Panasonic KX-NS1000 Pc Programming Manual page 392

9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
Resending Time Out (PTAP)
Specifies the length of time after which the PBX terminates resending PTAP (Panasonic Telephony
Administration Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Default
150 s
Value Range
150–240 s
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
First Resending Time (MGCP)
Specifies the length of time that the PBX waits before starting to resend MGCP (Media Gateway Control
Protocol) data.
To change the value displayed here, click Common Settings and set the desired value.
Default
500 ms
Value Range
500 ´ n (n=1–8) ms
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
Resending Time Out (MGCP)
Specifies the length of time after which the PBX terminates resending MGCP (Media Gateway Control Protocol)
data.
To change the value displayed here, click Common Settings and set the desired value.
Default
75 s
Value Range
75–120 s
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Card Property
392 PC Programming Manual Document Version 2016-03