Panasonic KX-NS1000 Pc Programming Manual page 330

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
NLP Setting
Specifies the NLP (Non-Linear Processor) setting to control echo sound quality.
Note
For KX-NT500 series phones, in place of this setting, the setting for
Configuration—[1-1] Configuration—Slot—V-UTEXT32—Card Property—Main is applied.
Default
Weak
Value Range
Disable, Weak, Normal, Strong
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Supplementary Service
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CLIP (Receive)
Specify where caller information about an incoming call is obtained:
•
Prioritized: P-Asserted-Identity®P-Preferred-Identity®From Header
•
Fixed: From Header
Default
P-Asserted-Identity Header
330 PC Programming Manual
NLP Setting in 9.20 PBX
Document Version 2016-03