Panasonic KX-NS1000 Pc Programming Manual page 672

11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
ICD Group Member: The timer is only activated after calls to the extension through an ICD Group.
Maintenance Console Location
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
Programming Manual References
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List— Wrap-up Timer
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8—
Timer
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 8—
Timer
Feature Manual References
10.1.3 ICD Group Features—Log-in/Log-out
Options—Overflow immediately when All Logout
Specifies whether overflow redirection is processed when all members of an ICD group are logged out.
Default
Enable (Queuing Busy Destination)
Value Range
Enable (Queuing Busy Destination), Disable (Keep Queuing)
Maintenance Console Location
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
Feature Manual References
10.1.1 ICD GROUP FEATURES
Options—Call Log for Built-in ACD Report
Specifies whether to log call information for the Built-in ACD Report. This feature requires an activation key.
Note
When this setting is enabled, certain hospitality features cannot be used. For details, refer to the relevant
chapter in the Feature Manual.
Default
Disable
Value Range
Enable (Logging), Disable
672 PC Programming Manual
Wrap-up
Wrap-up
Document Version 2016-03