Panasonic KX-NS1000 Pc Programming Manual page 418

9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Value Range
Max. 20 characters
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Primary/Secondary
Specifies the designation of the port as a primary port or secondary port.
Note
If an extension has been registered to the port, this setting cannot be changed from "Primary" to
"Secondary". De-register the port to change this setting.
Default
Primary
Value Range
Primary, Secondary
Maintenance Console Location
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property
Feature Manual References
2.1.7 Automatic Rerouting to Secondary PBX
Pair Site
Indicates the site where the assigned secondary port is located (reference only).
418 PC Programming Manual Document Version 2016-03