HP 10500 SERIES Configuration Manual page 158

FEC
4.4.4.4/32
[SwitchB] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 1024/1024
3.3.3.3/32 NULL/1024
[SwitchC] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 1024/3
3.3.3.3/32 3/NULL
[SwitchD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
4.4.4.4/32 3/NULL
[SwitchE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label
3.3.3.3/32 1024/3
The output shows that two LSPs are traversing Switch B and Switch C.
# Execute the display mpls te tunnel command on each switch.
[SwitchA] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[SwitchB] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[SwitchC] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
2.2.2.2:1 3.3.3.3
[SwitchD] display mpls te tunnel
LSP-Id Destination
1.1.1.1:1 4.4.4.4
[SwitchE] display mpls te tunnel
LSP-Id Destination
2.2.2.2:1 3.3.3.3
The output shows that two MPLS TE tunnels are traversing Switch B and Switch C.
In/Out Label In/Out IF
NULL/1024 -/Vlan1
In/Out IF
Vlan1/Vlan2
-/Vla4
In/Out IF
Vlan2/Vlan3
Vlan5/-
In/Out IF
Vlan3/-
In/Out IF
Vlan4/Vlan5
In/Out-If
-/Vlan1
In/Out-If
Vlan1/Vlan2
-/Vlan4
In/Out-If
Vlan2/Vlan3
Vlan5/-
In/Out-If
Vlan3/-
In/Out-If
Vlan4/Vlan5
150
Vrf Name
Vrf Name
Vrf Name
Vrf Name
Vrf Name
Name
Tunnel4
Name
Tunnel4
Tunnel5
Name
Tunnel4
Tunnel5
Name
Tunnel4
Name
Tunnel5