Clearing Mpls Statistics; Mpls Configuration Examples; Configuring Static Lsps - HP 10500 SERIES Configuration Manual

Task
Display information about LDP
sessions between LDP peers.
Display statistics information about
all LSP sessions.
Display information about LSPs
established by LDP.
NOTE:
The vpn-instance
information about LDP instances, see

Clearing MPLS statistics

Task
Clear MPLS statistics for one or all
MPLS interfaces.
Clear MPLS statistics for all LSPs or
the LSP with a specific index or
name.

MPLS configuration examples

This section provides examples of MPLS configuration.

Configuring static LSPs

Network requirements
Switch A, Switch B, and Switch C support MPLS.
Establish static LSPs between Switch A and Switch C so that subnets 1 1.1.1.0/24 and 21.1.1.0/24 can
access each other over MPLS. Test the connectivity of the static LSPs.
Command
display mpls ldp session [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ] [ peer-id |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
display mpls ldp session all
statistics [ | { begin | exclude |
include } regular-expression ]
display mpls ldp lsp [ all |
[ vpn-instance vpn-instance-name ]
[ dest-addr mask-length ] ] [ |
{ begin | exclude | include }
regular-expression ]
vpn-instance-name
option is used to specify information about an LDP instance. For
"Configuring MPLS
Command
reset mpls statistics interface
{ interface-type interface-number |
all }
reset mpls statistics lsp { index | all
| name lsp-name }
L3VPN"
81
Remarks
Available in any view.
Available in any view.
Available in any view.
Remarks
Available in user view.
Available in user view.