Panasonic KX-HDV130 Manual page 214

5.3.3 Ethernet Port Settings
Description
Value Range
Default Value
Web User Interface Reference
LLDP_INTERVAL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_VLAN_ID_PC
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_VLAN_PRI_PC
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CDP_ENABLE
Value Format
Description
214 Administrator Guide
Specifies whether to enable or disable the LLDP-MED feature.
Note
•
You should specify "Y" for only one of "LLDP_ENABLE", or
"VLAN_ENABLE". If "Y" is specified for two or more of the
parameters above, the settings are prioritized as follows:
VLAN_ENABLE >LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the VLAN-
related settings are used.
•
Y: Enable LLDP-MED
•
N: Disable
Y
Enable LLDP
INTEGER
Specifies the interval, in seconds, between sending each LLDP
frame.
1–3600
30
Packet Interval
INTEGER
Specifies the VLAN ID for the PC when LLDP is on.
0–4094
0
PC VLAN ID
INTEGER
Specifies the VLAN Priority for the PC when LLDP is on.
0–7
0
PC Priority
BOOLEAN
Specifies whether to enable the CDP feature.
Document Version: 2017-07