Panasonic KX-HDV130 Manual page 280

5.3.22 SIP Settings
Value Range
Default Value
Web User Interface Reference
SIP_RCV_DET_HEADER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SIP_RCV_DET_REQURI_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SIP_CONTACT_ON_ACK_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
280 Administrator Guide
•
Y: Enable SSAF
•
N: Disable SSAF
Note
•
If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_n" in
5.3.22 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
N
Enable SSAF (SIP Source Address Filter)
BOOLEAN
Specifies whether to check the user name part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
•
Y: Enable username check
•
N: Disable username check
Note
•
If set to "Y", the unit will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
•
If set to "N", the unit will not check the user name part of the
SIP URI in the "To" header.
N
BOOLEAN
Specifies whether to check ReqURI that is the part of SIP URI in "To"
header when INVITE with wrong target SIP URI is received.
•
Y
•
N
N
BOOLEAN
Document Version: 2017-07