Flexible Keys (For Kx-Hdv230/Kx-Hdv330/Kx-Hdv430) - Panasonic KX-HDV130 Manual

•
If the dialed phone number is "0011", "1011" and so on when [Call Even If Dial Plan Does Not Match] is
set to [No], the call is denied.
6.3 Flexible Keys (For KX-HDV230/KX-HDV330/
KX-HDV430)
You can customize the flexible keys on the unit. They can then be used to make or receive outside calls or
as feature buttons (function keys). These settings can be programmed either through the Web user interface
(→ see 4.6.5 Flexible Key Settings (No. 1–24) (For KX-HDV230/KX-HDV330/KX-HDV430) and 4.6.10 DSS
Console (For KX-HDV230/KX-HDV330/KX-HDV430)) or by configuration file programming (→ see
5.3.31 Flexible Key Settings and 5.3.32 DSS Key Settings (For KX-HDV230/KX-HDV330/KX-HDV430)).
The following types of flexible keys are available:
Button
One Touch Dial
BLF (Busy
Lamp Field)
Line
Document Version: 2017-07
Description
Used to dial a previously set phone
number with one touch.
Used to show the current status of
another extension, call the extension
and transfer calls to it.
Note
•
It may be necessary to specify
the Resource List URI to use
this feature, depending on your
phone system (→ see
[Resource List URI] in
4.6.2.1 Call Features in the
Web user interface or
"RESOURCELIST_URI_n" in
5.3.34 Call Control Settings in
the configuration file).
•
Specify the number assigned to
a BLF for performing call pickup
(→ see [Directed Call Pickup]
in 4.6.1.1 Call Control in the
Web user interface or
"NUM_PLAN_PICKUP_DIRECT"
in 5.3.30 Telephone Settings
in the configuration file).
Used to seize a line in order to make
or receive a call. The LED of the
function key indicates the status of the
line.

6.3 Flexible Keys (For KX-HDV230/KX-HDV330/KX-HDV430)

Off: The BLF extension is idle.
Red on: A corresponding BLF extension is
using the line.
Flashing red rapidly: The BLF extension is
receiving an incoming call.
Off: The line is idle.
Blue on: The line is on a call.
Flashing blue slowly: A call is on hold.
Flashing blue rapidly: A call (including Hold
Recall) is being received to the line (or a
shared line).
Red on: A shared line is in use or a call is on
private hold at another unit.
Flashing blue slowly: A shared line is on
hold at another unit.
Lamp Indication
-
Administrator Guide 367