INTDIGIT_TIM
Value Format
Description
Value Range
Default Value
Web User Interface Reference
POUND_KEY_DELIMITER_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RINGTONE_SETTING_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
DISPLAY_NAME_REPLACE
Value Format
Description
Value Range
Default Value
NUMBER_MATCHING_LOWER_DIGIT
Value Format
Document Version: 2017-07
INTEGER
Specifies the length of time, in seconds, within which subsequent
digits of a dial number must be dialed.
1–15 (s)
5
Inter-digit Timeout
BOOLEAN
Specifies whether the # key is treated as a regular dialed digit or a
delimiter, when dialed as or after the second digit.
•
Y: # is treated as the end of dialing delimiter
•
N: # is treated as a regular dialed digit
Y
Enable # Key as delimiter
INTEGER
Specifies the ringtone to each line for a unit.
1–32
RINGTONE_SETTING_1=1, RINGTONE_SETTING_2=2,
RINGTONE_SETTING_3=3, RINGTONE_SETTING_4=4,
RINGTONE_SETTING_5=5, RINGTONE_SETTING_6=6,
RINGTONE_SETTING_7=7, RINGTONE_SETTING_8=8,
RINGTONE_SETTING_9=1, RINGTONE_SETTING_10=2,
RINGTONE_SETTING_11=3, RINGTONE_SETTING_12=4,
RINGTONE_SETTING_13=5, RINGTONE_SETTING_14=6,
RINGTONE_SETTING_15=7, RINGTONE_SETTING_16=8
BOOLEAN
Specifies whether the name saved in the phonebook is used in place
of the name display if a matching entry is found.
•
Y: Enable Display Name Replace
•
N: Disable Display Name Replace
Y
INTEGER
5.3.30 Telephone Settings
Administrator Guide
307