Panasonic KX-HDV130 Manual page 230

5.3.9 TR-069 Settings
Description
Value Range
Default Value
ANNEX_G_STUN_USER_ID
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_PASS
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_MAX_KEEP_ALIVE
Value Format
Description
Value Range
Default Value
230 Administrator Guide
Specifies the port number of the STUN server for the CPE to send
Binding Requests.
Note
•
This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
1–65535
3478
STRING
Specifies the STUN user name to be used in Binding Requests (only
if message integrity has been requested by the STUN server).
Note
•
If the value for this setting is an empty string, the CPE must not
send STUN Binding Requests with message integrity.
Max. 256 characters (except ", &, ', :, <, >, and space)
Empty string
STRING
Specifies the STUN password to be used in computing the
MESSAGE-INTEGRITY attribute used in Binding Requests (only if
message integrity has been requested by the STUN server). When
read, this parameter returns an empty string, regardless of the actual
value.
Max. 256 characters (except ", &, ', :, <, >, and space)
Empty string
INTEGER
Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.
Note
•
This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
1–3600
300
Document Version: 2017-07