Panasonic KX-HDV130 Manual page 283

Value Range
Default Value
ADD_EXPIRES_HEADER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
ADD_TRANSPORT_UDP_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SIP_ADD_DIVERSION_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
Document Version: 2017-07
•
Y: Add the port parameter
•
N: Do not add the port parameter
Note
•
Request URI in REGISTER example:
–
If set to "Y", the port parameter is added to the Request-
Line, as follows:
Request-Line: REGISTER sip:192.168.0.10:5060 SIP/2.0
–
If set to "N", the port parameter is not added to the Request-
Line, as follows:
Request-Line: REGISTER sip:192.168.0.10 SIP/2.0
Y
BOOLEAN
Specifies whether to add an "Expires" header to REGISTER (adds an
"expires" parameter to the "Contact" header).
•
Y: Add Expires Header
•
N: Do not add Expires Header
N
BOOLEAN
Specifies whether to add the attribute "transport=udp" to the SIP
header URI.
•
Y: Add Transport UDP
•
N: Do not add Transport UDP
N
INTEGER
Specifies whether to add Diversion header information.
0–2
–
0: Do not add Diversion header information
–
1: Use own diversion information only for the Diversion header
–
2: Add diversion information to existing Diversion header
0
5.3.22 SIP Settings
Administrator Guide 283