Panasonic KX-HDV130 Manual page 300

5.3.27 SRTP Settings
Value Range
Default Value
Web User Interface Reference
SRTP_MIX_CONFERENCE_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SRTP_MIX_TRANSFER_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
Web User Interface Reference
300 Administrator Guide
•
0: SRTP
•
1: RTP/SRTP
•
2: Panasonic Original
•
3: SRTP/RTP
Note
•
0: Use only SRTP for outgoing and incoming calls.
•
1: Use only RTP for outgoing calls, and RTP or SRTP for
incoming calls.
•
2: Use RTP or SRTP for both outgoing and incoming calls.
This value is valid only when the unit is connected to a
Panasonic PBX.
"SRTP_MIX_TRANSFER_ENABLE_n" must also be set to "Y".
•
3: If you are using "RTP/AVP" and append "a=crypto", and the
response message includes "a=crypto", the conversation will
be established with SRTP. If "a=crypto" is not included, the
conversation will be established with RTP.
1
SRTP Mode
BOOLEAN
Specifies whether to allow conferences where each participant can
use either SRTP or RTP.
•
Y: Enable
•
N: Disable
N
Enable Mixed SRTP & RTP by Conference
BOOLEAN
Specifies whether to allow call transfers between a user who is using
SRTP and a user who is using RTP.
•
Y: Enable
•
N: Disable
N
Enable Mixed SRTP & RTP by Transfer
Document Version: 2017-07