Display Lldp Tlv-Config - HP 830 Command Reference Manual

Table 25 Command output
Field
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Description
Indicates whether LLDP is globally enabled.
Time when the neighbor information was last updated.
LLDP frame transmission interval.
TTL multiplier.
LLDP re-initialization delay.
LLDP frame transmission delay.
Trap transmission interval.
Number of the LLDP frames sent each time fast LLDP frame transmission
is triggered.
LLDP status of port 1.
Indicates whether LLDP is enabled on the port.
LLDP mode of the port:
•
Tx_Rx—The port sends and receives LLDP frames.
•
Rx_Only—The port only receives LLDP frames.
•
Tx_Only—The port only sends LLDP frames.
•
Disable—The port does not send or receive LLDP frames.
Indicates whether trapping is enabled.
LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of LLDP neighbors connecting to the port.
Number of MED neighbors connecting to the port.
Number of CDP neighbors connecting to the port.
Number of optional TLVs contained in an LLDP frame sent through the
port.
Number of unknown TLVs contained in all received LLDP frames.
113