Lldp Timer Tx-Delay - HP 830 Command Reference Manual

Default
The LLDP re-initialization delay is 2 seconds.
Views
System view
Default command level
2: System level
Parameters
delay: Sets the LLDP re-initialization delay, ranging from 1 to 10 seconds.
Examples
# Set the LLDP re-initialization delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer reinit-delay 4

lldp timer tx-delay

Use lldp timer tx-delay to set the LLDP frame transmission delay.
Use undo lldp timer tx-delay to restore the default.
Syntax
lldp timer tx-delay delay
undo lldp timer tx-delay
Default
The LLDP frame transmission delay is 2 seconds.
Views
System view
Default command level
2: System level
Parameters
delay: Sets the LLDP frame transmission delay, ranging from 1 to 8192 seconds.
Usage guidelines
It is a good practice to set the LLDP frame transmission delay to be no greater than a quarter of the LLDP
frame transmission interval.
If the LLDP frame transmission delay is greater than the LLDP frame transmission interval, the device uses
the LLDP frame transmission delay as the transmission interval.
Examples
# Set the LLDP frame transmission delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4
Related commands
lldp timer tx-interval
123