Display Interface - HP 830 Command Reference Manual

undo description
Default
The description of an interface is interface-name Interface. For example, the default description of
Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Views
Layer 2 aggregate interface view
Default command level
2: System level
Parameters
text: Specifies the interface description, a string of 1 to 80 characters.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab

display interface

Use display interface to display Layer 2 aggregate interface information.
Syntax
display interface [ bridge-aggregation ] [ brief [ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation interface-number [ brief ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays information about Layer 2 aggregate interfaces.
interface-number: Specifies an existing Layer 2 aggregate interface by its number. The value range
varies by device model. For more information, see About the Command References for HP Unified
Wired-WLAN Products.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in Down state and the causes. If you do not specify this
keyword, the command displays information about Layer 2 aggregate interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
69