Port Trunk Permit Vlan - HP 830 Command Reference Manual

Unified wired-wlan products
Hide thumbs Also See for 830:
Table of Contents

Advertisement

Views
WLAN-ESS interface view, Ethernet interface view, port group view, Layer 2 aggregate interface view
Default command level
2: System level
Parameters
access: Configures the link type of a port as access.
hybrid: Configures the link type of a port as hybrid.
trunk: Configures the link type of a port as trunk. This keyword is not supported in WLAN-ESS interface
view.
Usage guidelines
To change the link type of a port from trunk to hybrid or vice versa, you must first set the link type to
access.
The configuration made in Ethernet or WLAN-ESS interface view applies only to the port.
The configuration made in port group view applies to all ports in the port group.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
If the system fails to apply the configuration to an aggregation member port, it skips the port and
moves to the next member port.
Examples
# Configure Ten-GigabitEthernet 1/0/1 as a trunk port.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type trunk
# Configure all the ports in the manual port group group1 as hybrid ports.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group manual group1] group-member Ten-GigabitEthernet1/0/1
[Sysname-port-group manual group1] group-member Ten-GigabitEthernet1/0/2
[Sysname-port-group manual group1] port link-type hybrid
# Configure Layer 2 aggregate interface Bridge-Aggregation 1 and its member ports as hybrid ports.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid

port trunk permit vlan

Use port trunk permit vlan to assign the trunk ports to the specified VLANs.
Use undo port trunk permit vlan to remove the trunk ports from the specified VLANs.
50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

85087011900105007500

Table of Contents