HP 830 Command Reference Manual page 14

XGE1/0/2
When you use the begin keyword to filter the output, the system only searches the Layer 2 interface list.
# Display brief information about all UP interfaces.
<Sysname> display interface brief | include UP
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
M-GE1/0/0
NULL0
Vlan1
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
XGE1/0/1
# Display the brief information about all interfaces except Ethernet interfaces.
<Sysname> display interface brief | exclude XGE
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
M-GE1/0/0
NULL0
Vlan1
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
BAGG1
# Display information about interfaces in the down state and the relevant causes.
<Sysname> display interface brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
BAGG1
XGE1/0/2
Table 3 Command output
Field
The brief information of
interface(s) under route
mode:
ADM auto F
Link Protocol Main IP
UP UP 192.168.11.8
UP UP(s) --
UP UP 192.168.0.100
Link Speed Duplex Type PVID Description
UP 10G(a) F
Link Protocol Main IP
UP UP 192.168.11.8
UP UP(s) --
UP UP 192.168.0.100
Link Speed Duplex Type PVID Description
DOWN auto A
Link Cause
DOWN Not connected
ADM Administratively
Description
The command displays brief information about Layer 3 interfaces.
9
A 1
Description
A 1
Description
A 1