Vlan Configuration Commands; Basic Vlan Configuration Commands; Default; Description - HP 830 Command Reference Manual

VLAN configuration commands

Basic VLAN configuration commands

default

Use default to restore the default settings for a VLAN interface.
Syntax
default
Views
VLAN interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to change the description of the VLAN or VLAN interface.
Use undo description to restore the default.
Syntax
description text
undo description
32