Lenovo ThinkStation P410 Hardware Maintenance Manual page 114

b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward
push the studs upward
drive adapter
Figure 26. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of
the M.2 slot.
Figure 27. Removing the M.2 solid-state drive
• If you are installing an M.2 solid-state drive, pull outward the handle of the retention latch in the
M.2 solid-state drive adapter.
106
ThinkStation P410 Hardware Maintenance Manual
2 to release the heat sink. Then, lift the heat sink off the M.2 solid-state
3
.
1 and