1. Pivot the microprocessor retainer downward to close the retainer.
Figure 137. Closing the microprocessor retainer
2. Gently press down the small handle
down the small handle
Figure 138. Securing the microprocessor in the socket
3. Position the microprocessor socket cover on the microprocessor socket as shown. Then, lower the
socket cover straight down into the microprocessor socket on the system board.
Figure 139. Installing the microprocessor socket cover
2
, and then push the handle inward to secure it. Then gently press
1
and push the handle inward to lock the microprocessor retainer into position.
.
Chapter 9
Installing or replacing hardware
173