Lenovo ThinkStation P410 Hardware Maintenance Manual page 127

4. To install a new hard disk drive into the bracket, flex the bracket and align pin
pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 49. Installing the hard disk drive into the bracket
5. Slide the new hard disk drive into the enclosure from the rear until it snaps into position.
Figure 50. Installing the hard disk drive into the enclosure
1 , pin
.
Chapter 9 Installing or replacing hardware
2 , pin 3 , and
119