Display Ip Routing-Table Protocol - HP FlexNetwork 3600 v2 Series Command Reference Manual

State: Active Adv
Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
IpPrecedence:
NextHop: 127.0.0.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active NoAdv
For command output, see

display ip routing-table protocol

Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive |
verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public
network is displayed.
protocol: Specifies the routing protocol. It can be bgp, direct, isis, nat, ospf, rip, and static.
inactive: Displays information about only inactive routes. Without this argument, the command
displays information about both active and inactive routes.
verbose: Displays detailed routing table information. Without this argument, the command displays
brief routing table information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip routing-table protocol to display routing information of a specified routing protocol.
Examples
# Display brief information about direct routes.
Tag: 0
Tag: 0
Table 2.
Age: 1d00h20m52s
Process ID: 0
Cost: 0
QosLcId:
Interface: InLoopBack0
BkInterface:
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 1d00h20m52s
12