Display Rip Database - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
Triggered updates sent
Number of routes changes
Number of replies to queries

display rip database

Syntax
display rip process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rip database to display active routes in the database of the specified RIP process,
which are sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 1, ClassfulSumm
10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface
11.0.0.0/8, cost 1, ClassfulSumm
11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported
Table 8 Command output
Field
X.X.X.X/X
cost
classful-summ
Nexthop
Rip-interface
imported
Description
Number of sent triggered updates.
Number of changed routes in the database.
Number of RIP responses.
Description
Destination address and subnet mask.
Cost of the route.
Indicates the route is a RIP summary route.
Address of the next hop.
Routes learned from a RIP-enabled interface.
Routes redistributed from other routing protocols.
33