Display Ospf Peer Statistics - HP FlexNetwork 3600 v2 Series Command Reference Manual

Table 22 Command output
Field
Area
Router ID
Address
Pri
Dead-Time
Interface
State

display ospf peer statistics

Syntax
display ospf [ process-id ] peer statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf peer statistics to display OSPF neighbor statistics.
If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
Area ID
0.0.0.0
0.0.0.2
Total
OSPF Process 1 with Router ID 10.3.1.1
Neighbor Statistics
Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0 0
0 0
0 0
Description
Neighbor area
Neighbor router ID
Neighbor interface address
Neighboring router priority
Dead interval remained
Interface connected to the neighbor
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
0 0 0
0 0 0
0 0 0
82
0 0 1
0 0 1
0 0 2
1
1
2