Display Ospf Asbr-Summary - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. Use this argument to display information
about the routes to the ABR/ASBR under the specified OSPF process.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf abr-asbr to display information about the routes to OSPF ABR/ASBR.
If you use this command on routers in a stub area, no ASBR information is displayed.
Examples
# Display information about the routes to the OSPF ABR and ASBR.
<Sysname> display ospf abr-asbr
Type
Inter
Intra
Table 12 Command output
Field
Type
Destination
Area
Cost
Nexthop
RtType

display ospf asbr-summary

Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ] [ | { begin | exclude
| include } regular-expression ]
View
Any view
OSPF Process 1 with Router ID 192.168.1.2
Routing Table to ABR and ASBR
Destination
3.3.3.3
2.2.2.2
Area Cost Nexthop
0.0.0.0 3124 10.1.1.2
0.0.0.0 1562 10.1.1.2
Description
Type of the route to the ABR or ASBR:
•
Intra— intra-area route
•
Inter—Inter-area route
Router ID of an ABR/ASBR
ID of the area of the next hop
Cost from the router to the ABR/ASBR
Next hop address
Router type: ABR, ASBR
66
RtType
ASBR
ABR