Ip Route-Static Default-Preference; Ip Route-Static Fast-Reroute - HP FlexNetwork 3600 v2 Series Command Reference Manual

ip route-static default-preference

Syntax
ip route-static default-preference default-preference-value
undo ip route-static default-preference
View
System view
Default level
2: System level
Parameters
default-preference-value: Specifies the default preference for static routes, in the range of 1 to 255.
Description
Use ip route-static default-preference to configure the default preference for static routes.
Use undo ip route-static default-preference to restore the default.
By default, the default preference of static routes is 60.
If no preference is specified when configuring a static route, the default preference is used.
When the default preference is re-configured, it applies only to newly added static routes.
Related commands: display ip routing-table and ip route-static.
Examples
# Set the default preference of static routes to 120.
<Sysname> system-view
[Sysname] ip route-static default-preference 120

ip route-static fast-reroute

Syntax
ip route-static [ vpn-instance vpn-instance-name ] fast-reroute route-policy route-policy-name
undo ip route-static [ vpn-instance vpn-instance-name ] fast-reroute
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN to configure FRR for all matching
static routes in it. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is
specified, FRR is configured for all static routes on the public network.
route-policy route-policy-name: References a routing policy. The route-policy-name argument is a
case-sensitive string of 1 to 63 characters.
Description
Use ip route-static fast-reroute to configure static route fast reroute (FRR).
Use undo ip route-static fast-reroute to restore the default.
27