Host-Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
acl-number: Number of the ACL used for filtering incoming routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name: References an IP prefix list to filter incoming routes. The ip-prefix-name is a
string of 1 to 19 characters.
gateway ip-prefix-name: References an IP prefix list to filter routes from the gateway. ip-prefix-name
is a string of 1 to 19 characters.
interface-type interface-number: Specifies an interface by its type and number.
Description
Use filter-policy import to configure RIP to filter the incoming routes.
Use undo filter-policy import to restore the default.
By default, RIP does not filter incoming routes.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the
ACL should be configured with the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard
command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny |
permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command to
deny/permit a route with the specified destination and mask. The source keyword specifies the
destination address of a route and the destination keyword specifies the subnet mask of the route
(the subnet mask must be valid; otherwise, the configuration is ineffective).
Related commands: ip ip-prefix; acl (ACL and QoS Command Reference).
Examples
# Reference ACL 2000 to filter incoming routes.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] rip 1
[Sysname-rip-1] filter-policy 2000 import
# Reference IP prefix list abc on Vlan-interface 11 to filter all received RIP routes.
[Sysname-rip-1] filter-policy ip-prefix abc import Vlan-interface 11
# Configure ACL 3000 to permit only route 113.0.0.0/16 to pass, and reference ACL 3000 to filter
incoming routes.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] rip 1
[Sysname-rip-1] filter-policy 3000 import

host-route

Syntax
host-route
40