Display Link-Aggregation Summary - HP 12500 Series Command Reference Manual

Field
Flag
Remote
System ID
Received LACP Packets
Illegal
Sent LACP Packets

display link-aggregation summary

Use display link-aggregation summary to display the summary information for all aggregation
groups.
Syntax
display link-aggregation summary
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
Information about the remote system for a static link aggregation group is displayed as none or
not displayed at all, because static link aggregation groups are unaware of information about the
peer groups.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregate Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------------
BAGG1
BAGG10
Description
LACP protocol state flag.
Information about the remote end.
Remote end system ID, comprising the system LACP priority and the system
MAC address.
Total number of LACP packets received.
Total number of illegal packets.
Total number of LACP packets sent.
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
Selected
Ports
1
2
22
Unselected Share
Ports Type
0 Shar
0 Shar