Mac-Address Max-Mac-Count Enable-Forwarding (Vlan View) - HP 12500 Series Command Reference Manual

mdc-admin
Examples
# Configure GigabitEthernet 3/0/1 to learn up to 600 MAC address entries. Disable the device from
forwarding frames with unknown source MAC addresses after the number of learned MAC
addresses reaches the upper limit.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] mac-address max-mac-count 600
[Sysname-GigabitEthernet3/0/1] undo mac-address max-mac-count enable-forwarding
Related commands
mac-address
•
mac-address max-mac-count (interface view)
•
mac-address max-mac-count enable-forwarding (VLAN
view)
Use mac-address max-mac-count enable-forwarding to enable the device to forward frames with
unknown source MAC addresses after the number of learned MAC addresses reaches the upper
limit.
Use undo mac-address max-mac-count enable-forwarding to disable the device from forwarding
frames with unknown source MAC addresses after the number of learned MAC addresses reaches
the upper limit. Frames with the source MAC addresses listed in the MAC address table are
forwarded.
Syntax
mac-address max-mac-count enable-forwarding
undo mac-address max-mac-count enable-forwarding
Default
When the upper limit is reached, the received frames are forwarded.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Examples
# Configure VLAN 10 to learn up to 600 MAC address entries. Disable the device from forwarding
frames with unknown source MAC addresses after the number of learned MAC addresses reaches
the upper limit.
<Sysname> system-view
[Sysname] vlan 10
[Sysname-vlan10] mac-address max-mac-count 600
[Sysname-vlan10] undo mac-address max-mac-count enable-forwarding
11