Vlan Mapping Commands; Display Vlan Translation - HP 12500 Series Command Reference Manual

VLAN mapping commands

display vlan translation

Use display vlan translation to display VLAN mappings.
Syntax
In standalone mode:
display vlan translation [ interface interface-type interface-number | slot slot-number ]
In IRF mode:
display vlan translation [ interface interface-type interface-number | chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Displays VLAN mappings for an interface specified by its
type and number. If no interface is specified, the command displays VLAN mappings for all ports.
slot slot-number: Displays VLAN mappings for all ports on a card specified by its slot number. If no
slot number is specified, the command displays VLAN mappings for all ports on all cards. (In
standalone mode.)
chassis chassis-number slot slot-number: Displays VLAN mapping for all ports on the specified card
of an IRF member device. The chassis-number argument refers to the ID of the IRF member device,
and the slot-number argument refers to the number of the slot where the card resides. (In IRF
mode.)
Examples
# Display VLAN mappings for all ports.
<Sysname> display vlan translation
Interface GigabitEthernet3/0/1:
[Record 1]
Action
Dot1p
Outer VLAN
Inner VLAN
[Record 2]
Action
: Nest
: Inner
: 1
: 1, 3 to 4094
: Nest
118