Display Link-Aggregation Verbose - HP 12500 Series Command Reference Manual

Table 7 Command output
Field
Aggregate Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Selected Ports
Unselected Ports
Share Type

display link-aggregation verbose

Use display link-aggregation verbose to display detailed information about the aggregation
groups that correspond to the aggregate interfaces.
Syntax
display link-aggregation
[ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups that
correspond to Layer 2 aggregate interfaces.
route-aggregation: Displays detailed information about the Layer 3 aggregation groups that
correspond to Layer 3 aggregate interfaces.
Description
Aggregate interface type:
• BAGG—Layer 2 aggregate interface.
• RAGG—Layer 3 aggregate interface.
Aggregation group type:
•
S—Static link aggregation.
•
D—Dynamic aggregation.
Load-sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Local system ID, which comprises the system LACP priority and the system
MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the partner, which comprises the system LACP priority and
the system MAC address.
Total number of Selected ports.
Total number of Unselected ports.
Load-sharing type.
verbose [ { bridge-aggregation
23
| route-aggregation }