Reset Lacp Statistics; Shutdown - HP 12500 Series Command Reference Manual

The bridge-aggregation or route-aggregation keyword becomes available only after you create
Layer 2 or Layer 3 aggregate interfaces on the device.
Examples
# Clear the statistics for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1

reset lacp statistics

Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member
ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-list: Specifies a list of link aggregation member ports, in the format
interface-type interface-number [ to interface-type interface-number ], where interface-type
interface-number indicates the port type and port number. If no member ports are specified, the
command clears the LACP statistics on all member ports.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port

shutdown

Use shutdown to shut down the aggregate interface or subinterface.
Use undo shutdown to bring up the aggregate interface or subinterface.
Syntax
shutdown
undo shutdown
Default
Aggregate interfaces are down, and Layer 3 aggregate subinterfaces are up.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
36