HP 12500 Series Command Reference Manual page 47

Syntax
check region-configuration
Views
MST region view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Two or more spanning tree devices belong to the same MST region only if they are configured with
the same format selector (0 by default and not configurable), MST region name, and MST region
revision level; have the same VLAN-to-instance mapping entries in the MST region; and are
connected through a physical link.
HP recommends that you use this command to determine whether the MST region configurations
to be activated are correct. Activate them only when they are correct.
Examples
# Display MST region pre-configurations.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] check region-configuration
Admin Configuration
Format selector
Region name
Revision level
Configuration digest : 0x31f6c5490335d17513fb997ad0838582
Instance
0
15
Table 10 Command output
Field
Format selector
Region name
Revision level
Instance VLANs Mapped
Related commands
active region-configuration
•
instance
•
region-name
•
revision-level
•
vlan-mapping modulo
•
: 0
: 001122334400
: 0
VLANs Mapped
1, 3 to 4094
2
Description
Format selector of the MST region, which is 0 (not configurable).
MST region name.
Revision level of the MST region.
VLAN-to-instance mappings in the MST region.
42