Stp Region-Configuration; Stp Role-Restriction - HP 12500 Series Command Reference Manual

Examples
# In MSTP mode, set the device priority to 4096 in MSTI 1.
<Sysname> system-view
[Sysname] stp instance 1 priority 4096

stp region-configuration

Use stp region-configuration to enter MST region view.
Use undo stp region-configuration to restore the default MST region configurations.
Syntax
stp region-configuration
undo stp region-configuration
Default
The default settings for the MST region are as follows:
The MST region name of the device is the MAC address of the device.
•
All VLANs are mapped to the CIST.
•
The MSTP revision level is 0.
•
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After you enter MST region view, you can configure the MST region parameters, including the
region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region]

stp role-restriction

Use stp role-restriction to enable port role restriction.
Use undo stp role-restriction to disable port role restriction.
Syntax
stp role-restriction
undo stp role-restriction
Default
Port role restriction is disabled.
78