If the system fails to apply the configuration to the aggregate interface, it stops applying
the configuration to aggregation member ports.
If the system fails to apply the configuration to an aggregation member port, it skips the
port and moves to the next member port.
Examples
# Configure VLAN 100 as the PVID of the trunk port GigabitEthernet 3/0/1, and assign
GigabitEthernet 3/0/1 to VLAN 100.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] port link-type trunk
[Sysname-GigabitEthernet3/0/1] port trunk pvid vlan 100
[Sysname-GigabitEthernet3/0/1] port trunk permit vlan 100
Related commands
port link-type
•
port trunk permit vlan
•
113