Panasonic KX-NS1000 Programming Manual page 561

Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.1.3.3 Call Waiting
Busy Out—Busy Out for Analogue CO
Enables the PBX to automatically set a trunk to Busy Out status when a loop current is not detected, preventing
that trunk from being used.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.5.4.6 Trunk Busy Out
ISDN Voice Path Connection—Connect when "Alert" is sent from ISDN
Enables the voice path of an ISDN line to connect even when an "Alert" signal is received from the telephone
company.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PT Feature Access—No. 1–8
Specifies the System Feature Access Menu (1–8) shown on the display of an extension.
Value Range
None, Call Back Cancel, Call Pickup Direct, Call Pickup Group, DOORPHONE Call, Door Open, Relay On,
External BGM, Paging
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for networks
that disconnect a call if an alert message is not received.
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual 561