Pbx Configuration—[3-1] Group—Trunk Group - Panasonic KX-NS1000 Programming Manual

11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
11.1 PBX Configuration—[3-1] Group—Trunk Group
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG
Settings
Trunks can be organised into trunk groups. The settings of a trunk group are applied to all trunks in the group.
A maximum of 96 trunk groups can be programmed.
For more information on trunk groups, see "5.1.2 Group" in the Feature Guide.
Main
Group Name
Specifies the name of the trunk group for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
COS
Specifies the COS of the trunk group, applied when making a call from a trunk to another trunk with TIE Line
Service.
If you wish to prevent such calls from being made, ensure that the COS specified here has a TRS level of
"7" assigned for all relevant time modes in 10.7.1 PBX Configuration—[2-7-1] System—Class of
Service—COS Settings.
Value Range
1–512
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
4.3.1 TIE Line Service
578 PC Programming Manual