Utility—Monitor/Trace—Lan Sync Group - Panasonic KX-NS1000 Programming Manual

7.4.5 Utility—Monitor/Trace—LAN Sync Group
7.4.5 Utility—Monitor/Trace—LAN Sync Group
This utility monitors the status of CSs being synchronised with LAN synchronisation (KX-NS0154 only). CSs
receive data from other CSs that they are currently synchronised with. Information is displayed for IP-CSs that
are in INS status.
This option is only available at Installer level in On-line mode.
The displayed items for each CS are as follows:
Item
Index
Site
Shelf
Slot
Port
Connection
LAN Sync Status
LAN Sync Quality Level
To monitor the status of CSs
1.
From the LAN Synchronisation Group Number drop-down list, select the desired LAN Synchronisation
Group number.
2.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
3.
Click Start to monitor the status of LAN synchronisation.
Monitoring will be performed and the screen will refresh according to the specified interval.
4.
Click Stop to end monitoring.
5.
To refresh the screen manually at any time, click Refresh.
6.
To collect the monitored data, click Start Capture.
7.
Click Stop Capture to finish and save the monitored data.
A dialogue box will be displayed.
132 PC Programming Manual
Description
A unique index for the CS. (This depends on the number of V-IPCS4 cards
and the number of connected CSs.)
The site to which the CS is connected.
Always displays "Virtual".
The slot number of the CS in the selected synchronisation group.
The port number of the CS.
The connection status of the CS (OUS/INS/Fault).
The current synchronisation status of the CS, as follows:
1.
No Sync.: Attempting to establish synchronisation
2.
Establishing Sync.: Establishing synchronisation
3.
Good: Currently synchronised
4.
Keep Sync.: Maintaining synchronisation
5.
Unstable: The CS is running unsynchronised
6.
Sync. Lost: Synchronisation has been lost
7.
Out of system: Cannot communicate with the PBX
8.
Sync. Master: CS is the sync master or is a slave acting as the sync
master
Shows the quality of the synchronisation, depending on the value of LAN
Sync Status, as follows:
•
1, 7, 8: "–" is displayed.
•
6: The quality of the synchronisation before synchronisation was lost is
displayed.
•
Other: A number indicating the quality of the synchronisation (-16384–
16384 ns).