Panasonic KX-NS1000 Programming Manual page 286

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Anonymous format in "From" header
Specifies the format of the "From" header when not sending caller ID.
Value Range
Display name and SIP-URI, Display name only
Note
If "Display name and SIP-URI" is selected, the display name part and the SIP-URI of the "From" header
will be displayed as "Anonymous".
[Example]
From: Anonymous <sip:anonymous@anonymous.invalid>
If "Display name only" is selected, only the display name part of the "From" header will be displayed as
"Anonymous".
[Example]
From: Anonymous <sip:1234@example.com>
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
P-Asserted-Identity header
Select whether to include a P-Asserted-Identity header with caller information. This header will be sent
independent of the selection for
Value Range
Disable, Enable
Note
•
To copy values from one location to another, click Copy to.
•
If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Called Party
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
286 PC Programming Manual
Header Type (From Header/P-Preferred-Identity Header).