Panasonic KX-NS1000 Programming Manual page 295

T.38 FAX NAT Traversal
Specifies the NAT Traversal packet type when sending or receiving faxes using the T.38 protocol.
Value Range
Disable, Blank UDP
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
T.38 Option
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
T38 FAX QoS Available
Specifies the type of value to be stored in the ToS field in the IP header when using the T.38 protocol.
Value Range
ToS, DSCP, HEX
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
T38 FAX QoS-ToS Priority
Specifies the priority level in the ToS field when using the T.38 protocol.
Value Range
0–7
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual 295