X500/X501 Drive-Cliq Interfaces; X514 Power Supply For Digital Outputs And Sensors - Siemens SINAMICS S120 Combi User Manual

10.1.3.2

X500/X501 DRIVE-CLiQ interfaces

Table 10- 2 X500/X501 DRIVE-CLiQ interfaces
Pin
1
2
3
4
5
6
7
8
A
B
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 pieces) order number: 6SL3066-4CA00-0AA0
10.1.3.3

X514 power supply for digital outputs and sensors

Table 10- 3 Terminals for the power supply X514
Terminal
+
+
M1
M1
Max. connectable cross-section: 2.5 mm²
Type: Screw terminal 3 (see the chapter titled "Control cabinet installation and EMC/Connection system")
Note
The two "+" and "M1" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
including the current consumption for the digital outputs and to supply the sensor.
1)
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Designation
Power supply
Power supply
Electronics ground
Electronics ground
Additional system components
10.1 Terminal Module TM54F
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronics ground
Technical specifications
Voltage: 24 V DC (20.4 V – 28.8 V)
Current consumption: max. 4 A
Max. current via jumper in connector: 20 A
1)
175