12.2
DRIVE-CLiQ coupling
12.2.1
Description
The DRIVE-CLiQ coupling is used to connect two DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
You can find information on the permissible cable length in the chapter "DRIVE-CLiQ signal
cables".
12.2.2
Safety information
Note
Only cables from Siemens may be used for DRIVE-CLiQ connections.
12.2.3
Interface description
12.2.3.1
Overview
①
②
Figure 12-5
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
Rating plate
Protective cap, Yamaichi, order number: Y-ConAS-24-S
Interface overview, DRIVE-CLiQ coupling
Accessories
12.2 DRIVE-CLiQ coupling
233