3 Installing the SIP Cell Stations
4.
Click Save.
The SIP-CS will restart.
The SIP-CS is now set as the Super Master CS.
Connecting SIP-CSs to the LAN
Confirming the MAC Addresses of all the SIP-CSs
Before connecting the SIP-CSs to the LAN, confirm the MAC address of each SIP-CS.
The MAC address of each SIP-CS is required in a procedure described later. The MAC address is written on
the rear side of each SIP-CS.
Connecting SIP-CSs to the LAN
1.
Disconnect the Super Master CS from the PC.
2.
Place the Super Master CS in its planned location, and then connect it to the LAN.
3.
Place the other SIP-CSs in their planned locations, and then connect them to the LAN.
All the SIP-CSs (except Super Master CS) will automatically acquire their IP address from the DHCP server.
24
Installation Guide