Panasonic KX-UDS124 Installation Manual page 49

Finishing Registration from S-PSs
After you have registered the S-PSs to the Air Sync Master CS, you must complete registration from each
S-PS individually.
1.
Make sure that the S-PS is not registered.
Note
For details, refer to the documentation for the S-PS.
2.
Press .
OK
"HOLD DOWN OK TO REGISTER" is displayed.
3.
Hold down
OK
4.
When registration has completed, you will hear a confirmation tone and "Registered" will be displayed.
Unregistering S-PSs
If you want to unregister a specified PS, follow the procedure below.
1.
Click the System tab, click PS Registration – Delete PS Registration.
2.
Select the S-PSs to be unregistered in Available PS, and then click
To select all available S-PSs, click
3.
Click Next.
4.
Click OK to confirm unregistration.
Unregistering a Base System from the S-PS
If the S-PS was outside the coverage area or was turned off when the above-mentioned unregistration
procedure was performed, you must unregister the base system manually.
1.
Select "System Option".
Tone Option
System Option
Other Option
2.
Enter the password.
Enter Password
_ _ _ _
3.
Select "Cancel Base".
Register H/S
Cancel Base
Select Base
System Lock
Change PIN
until "Please wait..." is displayed.
. To deselect S-PS(s), click
4 Deployment Procedure
.
or .
Installation Guide 49