Panasonic KX-UDS124 Installation Manual page 48

4 Deployment Procedure
3.
Enter the password.
Enter Password
_ _ _ _
4.
Select Register H/S.
Register H/S
Cancel Base
Select Base
System Lock
Change PIN
5.
Select a base number. You can register four separate bases on your S-PS.
Register H/S
Base 1
Base 2
Base 3
Base 4
6.
Hold down
OK
Please Wait...
7.
When registration has completed, "Registered" will be displayed.
Registered
Note
You can register multiple S-PSs continuously and simultaneously. However, PS Registration mode will
terminate if no registrations are detected within 2 minutes. All SIP-CSs controlled by the Super Master CS
will enter PS Registration mode at the same time as the Super Master CS. You can register a S-PS to any
of the SIP-CSs.
Checking Progress
You can check registration progress on the PS Registration screen.
If Registering is displayed on the left of the screen, you can check the registration status of each S-PS in the
Wireless Status field.
If Complete is displayed on the left of the screen, all S-PSs that selected for registration were registered
successfully.
48 Installation Guide
until "Please wait..." is displayed.