Ps Registration - Panasonic KX-UDS124 Installation Manual

4.7 PS Registration

This section shows how to register S-PS by using Web user interface.
Log in to the Web User Interface of the Super Master CS
Please refer to "Logging in to the Web User Interface" in "3.4 Basic Network Configuration" for entering Web
user interface.
Registering Extension Numbers and Extension Names for S-PSs
Follow the procedure below to assign extension numbers and extension names to the S-PSs.
1.
In the System tab, select PS Registration.
2.
Enter an extension name in PS Name.
3.
Seledt Line1 SIP Setting or Line2 SIP Setting.
Note
Some SIP servers allow only 1 extension number per telephone. For details, refer your SIP server's
documentation.
4.
Enter the Phone Number, and enter Authentication ID and Authentication Password if necessary.
5.
Click All Save.
6.
Repeat steps 2 to 5 for each S-PS.
Note
If the S-PS name is too long to display, the end of the name may not be displayed on the PS's standby
screen.
Starting Registration Mode
After you have configured the S-PS name and SIP settings, follow the procedure below to register S-PSs.
1. In the System tab, select PS Registration ® Start PS Registration.
2.
Select the S-PSs to be registered in Available PS, and then click
.
To deselect S-PS(s), click
3.
Click Next.
4.
Click OK to confirm registration.
Registering S-PSs
After entering PS Registration mode, follow the procedure below to register each S-PS.
1.
Turn on the S-PS.
2.
Select System Option.
Tone Option
System Option
Other Option
or .
4 Deployment Procedure
.To select all available S-PSs, click
Installation Guide 47