Deployment Procedure - Panasonic KX-UDS124 Installation Manual

4 Deployment Procedure

The deployment procedure for establishing a wireless system is as follows.
4.1 Overview
1. Site Planning
Choose the optimal installation locations for SIP-CSs. Site planning requires careful preparation and thorough
testing.
2. Site Survey
Confirm the signal condition of the planned location using two un-registered CSs and one S-PS.
When connecting the wireless system, use extreme care in conducting the site survey. Site surveys can be
conducted using two KX-UDS124s. An incorrectly performed site survey can result in a poor service area,
frequent noise, disconnection of calls, and synchronisation failure of SIP-CSs.
3. CS Registration
Register all SIP-CSs in the system which the Air Sync Master CS is controlling.
4. Tree Survey
Create the synchronisation hierarchy for each Air Sync Group to provide stable Air Synchronisation.
There are 2 types of Tree Survey methods, as shown in the table below:
Tree Survey Type
Web User Interface
Programming
CS Maintenance
Tool Programming
5. Configuration
Specify SIP server network informations, and SIP account information of extensions.
6. S-PS Registration
Register S-PSs to the Super Master CS.
Description
Installing the SIP-CS after conducting a
Tree Survey by accessing the Web user
interface from a PC connected to the same
network.
This method provides an easier but less
accurate Tree Survey.
Installing the SIP-CS after conducting a
Tree Survey using the CS Maintenance
Tool installed on a PC connected to the
same network.
This method provides a more accurate
Tree Survey.
4 Deployment Procedure
References
Refer to "Section 2 Web User
Interface Programming" in the
Administrator Guide.
xxx
Installation Guide 25