Configuring A Portal Authentication Server; Configuring A Portal Web Server - HP FlexNetwork 10500 Series Security Configuration Manual

Configuring a portal authentication server

Configure this feature when user authentication uses an external portal authentication server.
Perform this task to configure the following portal authentication server parameters:
•
IP address of the portal authentication server
•
VPN instance of the portal authentication server
•
Shared encryption key used between the device and the portal authentication server
•
Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server
The device supports multiple portal authentication servers.
Do not delete a portal authentication server in use. Otherwise, users authenticated by that server
cannot log out normally.
To configure a portal authentication server:
Step
1. Enter system view.
2. Create a portal
authentication server,
and enter its view.
3. Specify the IP address of
the portal authentication
server.
4. (Optional.) Set the
destination UDP port
number used by the
device to send unsolicited
portal packets to the
portal authentication
server.

Configuring a portal Web server

Perform this task to configure the following portal Web server parameters:
•
VPN instance of the portal Web server
•
URL of the portal Web server
•
Parameters carried in the URL when the device redirects the URL to users
The device supports multiple portal Web servers.
To configure a portal Web server:
Step
1. Enter system view.
Command
system-view
portal server server-name
•
To specify an IPv4 portal server:
ip ipv4-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
•
To specify an IPv6 portal server:
ipv6 ipv6-address [ vpn-instance
vpn-instance-name] [ key { cipher |
simple } key-string ]
port port-id
Command
system-view
141
Remarks
N/A
By default, no portal
authentication server is
created.
Specify an IPv4 portal
authentication server, an IPv6
authentication portal server, or
both.
By default, no portal
authentication server is
specified.
By default, the UDP port
number is 50100.
This port number must be the
same as the listening port
number specified on the portal
authentication server.
Remarks
N/A