General Guidelines And Restrictions; Configuration Task List; Enabling Port Security - HP FlexNetwork 10500 Series Security Configuration Manual

In this mode, the port performs 802.1X authentication first. If 802.1X authentication fails, MAC
authentication is performed.
•
macAddressOrUserLoginSecureExt.
This mode is similar to the macAddressOrUserLoginSecure mode, except that this mode
supports multiple 802.1X and MAC authentication users.
•
macAddressElseUserLoginSecure.
This mode is the combination of the macAddressWithRadius and userLoginSecure modes, with
MAC authentication having a higher priority as the Else keyword implies. The mode allows one
802.1X authentication user and multiple MAC authentication users to log in.
In this mode, the port performs MAC authentication upon receiving non-802.1X frames. Upon
receiving 802.1X frames, the port performs MAC authentication and then, if the authentication
fails, 802.1X authentication.
•
macAddressElseUserLoginSecureExt.
This mode is similar to the macAddressElseUserLoginSecure mode except that this mode
supports multiple 802.1X and MAC authentication users as the Ext keyword implies.

General guidelines and restrictions

Do not configure port security and EVB on the same port. For information about EVB, see EVB
Configuration Guide.

Configuration task list

Tasks at a glance
(Required.)
(Optional.) Setting port security's limit on the number of secure
MAC addresses on a port
(Required.)
(Required.)
•
Configuring NTK
•
Configuring intrusion protection
(Optional.) Configuring secure MAC addresses
(Optional.) Ignoring authorization information from the server
(Optional.) Enabling MAC move
(Optional.) Enabling the authorization-fail-offline feature
(Optional.) Applying a NAS-ID profile to port security

Enabling port security

Before you enable port security, disable 802.1X and MAC authentication globally.
When port security is enabled, you cannot enable 802.1X or MAC authentication, or change the
access control mode or port authorization state. Port security automatically modifies these settings in
different security modes.
To enable port security:
Enabling port security
Setting the port security mode
Configuring port security features:
195
Remarks
N/A
N/A
N/A
Configure one or more port security
features according to the network
requirements.
N/A
N/A
N/A
N/A
N/A